Special tools

Blowing lance

For rough cleaning of the workpiece following machining. Chips sticking to it can be removed as well as coarse emulsion residues. Can be used for the preliminary cleaning of the gripper. Can be used to blow out the boreholes following deburring.

WMS Werkzeug Blaslanze

Technical data

Model:
Blowing lance
Article No.:
102343
Designation:
Blowing lance
Options:
The head can be adapted individually

 

Low-speed tool 34f

Spindle 34f is very similar to Spindle 34c. The difference of the 34f version is that the upper cover is spring-loaded.

WMS Werkzeug 34f

Technical data

Model:
IRT-LLS200-Z
Article No.:
113358
Designation:
Low-speed tool 34f
Tool inserts:
Reamers
Drive:
Pneumatic drive
Output:
300 Watt
Speed:
1960 rpm
Noise level:
n/a
Energy consumption:
500 l/min
Weight:
6 kg

Accessories

Collets Type ER/ESX16, clamping range 1 mm, Ø 1 mm – Ø 10 mm

 

Low-speed tool 34c

The drive is fixed and has a pendulum head. The restoring force can be changed via an adjustment screw at the bottom of the pendulum head. The pendulum head allows for a radial offset of max. 2 mm between collet and drive.

WMS Werkzeug 34c

Technical data

Model:
IRT-LLSC
Article No.:
102922
Designation:
Low-speed tool 34c
Tool inserts:
Reamers
Drive:
Pneumatic drive
Output:
230 Watt
Speed:
240 rpm
Noise level:
n/a
Energy consumption:
500 l/min
Weight:
6 kg
Options:
Speed monitoring

Accessories

Collets Type ER/ESX11, clamping range -0.5 mm, Ø 1 mm – Ø 7 mm

 

Low-speed tool 34h

For forward and backward deburring of boreholes with a special blade insert. Is mainly used for backward deburring and boreholes with uneven contours. The tool can be adapted individually to a workpiece with different spring strengths and blade shapes.

WMS Werkzeug 34h

Technical data

Model:
IRT-LLSH
Article No.:
113900
Designation:
Low-speed tool 34h
Tool inserts:
Special tools
Drive:
Pneumatic drive
Output:
230 Watt
Speed:
200 – 500 rpm
Noise level:
n/a
Energy consumption:
500 l/min
Weight:
6 kg
Options:
Speed monitoring

Accessories

Collets Type ER/ESX11, clamping range -0.5 mm, Ø 1 mm – Ø 7 mm

 

Brush axial 37c

For the precise machining of surfaces and the removal of secondary burrs. Suitable for aluminium casting alloys and cast steel. The brush drive Type IRT-BS500 is intended for the use of cup brushes and end brushes.

WMS Werkzeug 37c

Technical data

Model:
IRT-BS500
Article No.:
102946
Designation:
Brush axial 37c
Tool inserts:
Various brushes
Drive:
Pneumatic drive
Output:
500 Watt
Speed:
2400 rpm
Noise level:
n/a
Energy consumption:
500 l/min
Weight:
6 kg
Options:
Wear control, speed monitoring

Accessories

Collets Type ER/ESX16, clamping range 1 mm, Ø 1 mm – Ø 10 mm

Countersink

Overview